Industrial Pressure Gauges
DESIGNED TO PERFORM ON ANY APPLICATION
One Moving Part
Gearless, Direct Drive technology means no linkages, springs or gears to wear or break. Unmatched vibration, pulsation and shock performance.
No Need for Liquid Fill
Unique, internal pointer dampening eliminates pointer flutter without liquid fill, a primary culprit to the premature failure of C-Tube gauges.
Military Trusted Durability
The military recognizes the performance advantages of Gearless, Direct Drive over traditional C-Tube designs.
The difference is so significant that they often require direct drive on contracts for extreme environments.
Our low-volume design requires far less process to operate than the competitor’s high volume C-Tube design. This significantly reduces the impact of temperature on accuracy.
Operating temperatures up to 400°F Ambient / 600°F Media
All solid front case designs. A low volume translates to a low leak rate that in the case of catastrophic failure, reduces the spill of process.
Low volume enables performance on mini diaphragm seals. This can provide significant performance and cost advantages vs. competitiors.
Energy & Power plants
Gas filling stations
Refineries, and more...
±.25% of F.S. (Grade 3A)
±.5% of F.S. (Grade 2A)
±.5% F.S. at M.S. / ±1% F.S.
*For details see accuracy specs page
Vacuum - 15,000 psi (or equivalent)
Units: psi, bar, kPa, MPa, kg/cm², inHg, mmHg
Types: Single or Dual Scale, Vacuum and Compound
See dial availability chart for complete list of ranges
ABS: -65°F to 250°F
GFN and Metal: -65°F to 600°F
ABS: -65°F to 190°F
GFN and Metal: -65°F to 400°F
ABS (acrylonitrile butadiene styrene)
Glass-Filled Nylon: High-Temp Yellow Turret
Sizes, Types and Colors:
2.5", 3.5", 4.5", 6", 8.5"
Front Flange, No Flange, Rear Flange, Turret
Black, Blue, Green, Red, White, Yellow or other specified
Metal Case Finish: Powder Coated or Unpainted
Silver Braze (nickel braze available)
316 SS standard
Tempered Glass (increases heat tolerance)
Burst Pressure: 500% F.S. pressure or 25,000 psi
Overpressure w/o calibration shift:
50% for gauges ≤ 5,000 psi or equivalent
25% for gauges > 5,000 psi or equivalent
LIFETIME LIMITED WARRANTY
Lifetime warranty that the Bourdon tube will not malfunction due to wear.
1 year from delivery or 18 months from date of manufacture against defects in materials and workmanship.i